Showing posts with label childers insulation pipe mastic cp 11 cp11. Show all posts
Showing posts with label childers insulation pipe mastic cp 11 cp11. Show all posts

Thursday, September 29, 2011

Childers CP 11 Insulation Mastic

What is Childers CP-11 / CP-10 Vinyl Acrylic Mastic Coating?
CP-11 / CP-10 weather barrier coating is a tough, durable, and fire-resistive water based mastic for most types of thermal insulation and finishing and insulating cements. It is very thixotropic – it looks heavy but spreads easily.  It is available in a variety of standard and special fade resistant colors. It is outdoor rated and U.V. resistant.

When to Use Childers CP11 / CP10 Vinyl Acrylic Mastic Coating?
CP-11 / CP-10 weather barrier coating is unsurpassed for the mechanical protection and weatherproofing of thermal insulations both outdoors and indoors, in hot, cold, and dual-temperature service. However, since it is a ‘breathing’ coating (vapors under pressure will pass through it) it should only be used over insulation in low temperature, or dual-temperature service when the insulation themselves are vapor barriers.
How to Apply CP-11 and CP-10?

Vicryl CP11 and CP10 weather barrier coating is easy to apply by trowel (CP-10), Brush or Heavy Duty Airless Spray (CP-11). Its thixotropic consistency yields a smooth, attractive finish even over rough substrates; it readily fills gaps and imperfections. CP 10 / CP 11 coating should be applied with glass fiber reinforcing mesh.

What Are The Benefits of Using Childers CP Products?
• In the wet state, VI-CRYL CP-10/11 weather barrier coatings is non-flammable. It contains no solvents that will attack insulation or facings.
• The cured film is tough, flexible, and resists most common chemicals and many solvents.
• It is fire-resistive: its flame spread index being within the range of acceptance of government and industrial agencies.

What Certifications and Standards Does CP-11 / CP-10 Meet?
• Meets NFPA Standard 90-A and 90-B 25/50 requirements.
• Qualifies under Coast Guard Specification 164.012.
• Has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).
• Meets requirements for LEED IEQ 4.1 Low-Emitting Materials, Paints and Coatings. VOC: 45 g/l, less water and exempt solvents.